Dodge Nitro: Fuses
Totally Integrated Power Module
The Totally Integrated Power Module (TIPM) is located in the engine compartment near the battery. This center contains cartridge fuses, mini fuses and relays. A label that identifies each component is printed on the inside of the cover.
Totally Integrated Power Module (TIPM)














CAUTION:
• When installing the integrated power module
cover, it is important to ensure the cover is properly
positioned and fully latched. Failure to do so
may allow water to get into the integrated power
module, and possibly result in a electrical system
failure.
• When replacing a blown fuse, it is important to
use only a fuse having the correct amperage rating.
The use of a fuse with a rating other than indicated
may result in a dangerous electrical system overload.
If a properly rated fuse continues to blow, it
indicates a problem in the circuit that must be
corrected.
Replacement bulbs
LIGHT BULBS – Interior Bulb No. Dome Lamp. . . . . . . . . . . . . . . . . . . . . . . . . TL212–2. Liftgate Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . 567. Overhead Console Lamps. . . . . . . . . . . . . PLW214–2A. Reading Lamp . . . . . . . . . . . . . . . . . . . . . . WL212–2. LIGHT BULBS – Exterior Bulb No. Headlamp . . . . . . . . . . . . . . . . . . . . . . . . . 9008 H13. Front Park/Turn . . . . . . . . . . . . . . . . . . . . . . 3157AK. Front Sidemarker. . . . . . . . . . . . . . . . . . . . . . . . . 168. Back-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3057K. Center High Mounted Stoplamp . . . . . . . . . . . . . LED (serviced at an authorized dealer). Fog Lamp. . . . . . . . . . . . . . . . . . . . . . . . . . H10 9145. License Plate Lamp . . . . . . . . . . . . . . . . . . . . . . . 168. Rear Tail, Stop, Turn Signal. . . . . . . . . . . . . . . . 3057K.
See also:
Changing the oil and filter
The engine oil and filter should be changed at
those intervals specified in the maintenance
schedule in Section 5. If the car is being driven
in severe conditions, more frequent oil and filter
changes are required.
The procedure for changi ...
Battery
- Keep the battery surface clean and dry.
Clean the battery with a solution of baking
soda and water.
- Make certain the terminal connections are
clean and securely tightened.
- If the vehicle is not to be used for 30 days or
longer, disconn ...

Maintenance procedures